OBJECTIVE
- To analyze and solve the problem happen during build this project.
CONTENT
FAULT 2
There have problem that the credit not reduced
although the load already used, it fault from connection interfacing hardware
and software between the power meter and PIC.
TROUBLESHOOTING
FAULT (NO MONEY REDUCTION)
To trace the
fault, check the circuit:
i. Troubleshoot
Power Meter. The connection in the right position Pulse Reading Meter (Pin 5 and Pin 6)
ii.The software (program) right because no
error after compile at the C Compiler
CONCLUSION
To solve the fault is to change the program from:
1 KW = RM0.10 TO 1 PULSE = RM 0.10
The reduction depends on the pulse of the signal from Power Meter to PIC. It happens because for 1kW, it will take a long time because 1 kW = 1000 pulse.
No comments:
Post a Comment